USER TOOLS 15 February 2006
5-212
5.8 USER TOOLS
5.8.1 OVERVIEW
This section is a summary of the user tools. Refer to the operator’s manual for
more details.
1. On the operation panel, press the User Tools button.
2. Press the appropriate key, then access the following items:
• Initial System
• Copier/Document Box
• Initial Printer Settings
• Initial Scanner Settings
• Display Language
• Contact Information
• Counters
You can use these tools while the machine is operating, during a jam, or even
when a warning is displayed. However, you cannot move to the user screen while
in the SP mode, but you can easily switch between the SP mode screen and the
operation screen by pressing Copy Window.
During machine operation, in the jam mode, or while a warning message is
displayed, the display language can be changed and the counters can be
displayed. However, the counters cannot be printed.
To Next Page
Loading...
Need help?
General
