MFP OPTIONS: B246 SERIES 15 February 2006
1-176
1.24.2 COMMON PROCEDURES
Inserting SD Cards
Insert SD cards with the notched corner down.
The insertion point for the SD cards are offset slightly to the left. Make sure the SD
card is inserted correctly before you push it into the slot.
Pushing in the SD Card also releases it for removal. Make sure the SD Card is
inserted and locked in place. If it is partially out of the slot, push it in gently until it
locks in place.
Storing Copied SD Cards
Copied SD cards cannot be used. However, they must be stored at the site to
server as proof of purchase by the customer.
1. xx Pendng!
2. xx Pending!
00MTY.bmp00MTY.BMP
To Next Page
Loading...
Need help?
General
