VLAN Subinterface Commandsonthe
Cisco ASR 9000 Series Router
This module provides command line interface (CLI) commands for configuring IEEE 802.1Q VLANs on
the Cisco ASR 9000 Series Router.
The maximum VLAN limit that can be configured for a specific card is listed below:
Table 64: Maximum VLAN Limit per Slice for Below Cards
VLAN MAX Limit per SliceCard
16260NC6-60X10GE-M-S
1884NC6-10X100G-M-P
1884NC6-10X100G-M-K
•
dot1q vlan, page 1090
•
interface (VLAN), page 1092
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1089
To Next Page
Loading...
Need help?
General
