clear frame-relay lmi interface
To clear the LMI statistics for the given interface or location, use the clear frame-relay lmi command in
EXEC mode.
clear frame-relay lmi interface {type interface-path-id| all [location node id]}
Syntax Description
Interface type. For more information, use the question mark (?) online help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
Clears LMI statistics for all interfacesall
(Optional) Clears LMI statistics for all interfaces at the location specified by node-id.
The node-id argument is entered in the rack/slot/module notation.
location node-id
Command Default
No default behavior or values
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
executefr
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
425
Frame Relay Commands on the Cisco ASR 9000 Series Router
clear frame-relay lmi interface
To Next Page
Loading...
Need help?
General
