ModificationRelease
The show ethernet cfm local meps detail and show ethernet cfm local meps
verbose command outputs were modified to include CCM interval information.
Release 4.3.1
The show ethernet cfm local meps verbose command output is modified to
include counts for more packet types (DMM, DMR, SLM, SLR, LMM, LMR),
and exclude rows in which the sent and received packet count is zero.
Release 5.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
All MEPs are displayed in the show ethernet cfm local meps command output, unless they have configuration
errors.
Task ID
OperationsTask ID
readethernet-services
Examples
Example 1: show ethernet cfm local meps Command
This example shows sample output of the default statistics for local MEPs without any filtering:
RP/0/RSP0/CPU0:router# show ethernet cfm local meps
A - AIS received I - Wrong interval
R - Remote Defect received V - Wrong Level
L - Loop (our MAC received) T - Timed out (archived)
C - Config (our ID received) M - Missing (cross-check)
X - Cross-connect (wrong MAID) U - Unexpected (cross-check)
P - Peer port down
Domain foo (level 6), Service bar
ID Interface (State) Dir MEPs/Err RD Defects AIS
----- ------------------------ --- -------- -- ------- ---
100 Gi1/1/0/1.234 (Up) Up 0/0 N A L7
Domain fred (level 5), Service barney
ID Interface (State) Dir MEPs/Err RD Defects AIS
----- ------------------------ --- -------- -- ------- ---
2 Gi0/1/0/0.234 (Up) Up 3/2 Y RPC L6
RP/0/0/CPU0:router# show ethernet cfm local meps
A - AIS received I - Wrong interval
R - Remote Defect received V - Wrong Level
L - Loop (our MAC received) T - Timed out (archived)
C - Config (our ID received) M - Missing (cross-check)
X - Cross-connect (wrong MAID) U - Unexpected (cross-check)
P - Peer port down
Domain foo (level 6), Service bar
ID Interface (State) Dir MEPs/Err RD Defects AIS
----- ------------------------ --- -------- -- ------- ---
100 Gi1/1/0/1.234 (Up) Up 0/0 N A
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
334
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet cfm local meps
To Next Page
Loading...
Need help?
General
