show ethernet cfm interfaces statistics
To display the per-interface counters for Ethernet Connectivity Fault Management (CFM), use the show
ethernet cfm interfaces statistics command in EXEC mode.
show ethernet cfm interfaces [type interface-path-id] statistics [location node-id]
Syntax Description
(Optional) Interface type. For more information, use the question mark (?) online
help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
(Optional) Displays information about the node location specified as rack / slot /
module. Location cannot be specified if you configure an interface type.
location node-id
Command Default
All CFM counters from all interfaces are displayed.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.7.2
The command is enhanced to retrieve PM statistics from satellite.Release 5.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The location cannot be specified if a particular interface is specified.Note
Task ID
OperationsTask ID
readethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
327
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet cfm interfaces statistics
To Next Page
Loading...
Need help?
General
