Examples
The following example shows how to set the Local Management Interface (LMI) monitored events count to
5.
RP/0/RSP0/CPU0:router(config)# interface pos 0/1/0/1
RP/0/RSP0/CPU0:router(config-if)# frame-relay intf-type dce
RP/0/RSP0/CPU0:router(config-if)# frame-relay lmi-n393dce 5
Related Commands
DescriptionCommand
Sets the error threshold on a DCE interface.frame-relay lmi-n392dce, on page 436
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
440
Frame Relay Commands on the Cisco ASR 9000 Series Router
frame-relay lmi-n393dce
To Next Page
Loading...
Need help?
General
