Cisco A9K-SIP-700 Command Reference Guide

Examples
The following example shows how to display Virtual Circuit (VC) manager information for the multlink
interface 0/1/0/0:
RP/0/RSP0/CPU0:router# show frame-relay vcm-info interface multilink 0/3/0/0/1
VCM IDB:Multilink0_3_0_0_1
==================================
IDB type: IFT_MAIN
<main specific>
i/f term type: L3
i/f handle: 0x06186240
BW: 0x00000c00
OIR insert: F
VC chkpt oid: 0x00000000
proto info: 500323c8 [ptr]
proto fn table: 500323d4 [ptr]
i/f type: 0x00000037 [IFT_MULTILINK]
i/f state: 0x00000003 [up]
i/f basecaps num: 0x0000004c [fr]
i/f basecaps state: 0x00000003 [up]
VCM states: 5002c708 [ptr]
in db: T
chkpt: F
datapath info 0 [0 bytes]
partner info 50016d98 [16 bytes]
encaps type: IETF
intf type: DTE
non chkptd info 0 [0 bytes]
Related Commands
DescriptionCommand
Configures a multilink interface and enters multilink interface
configuration mode.
interface multilink, on page 680
Creates a name for a Frame Relay multilink bundle interface.frame-relay multilink bid, on page 452
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
485
Frame Relay Commands on the Cisco ASR 9000 Series Router
show frame-relay vcm-info interface

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English