Related Commands
DescriptionCommand
Specifies or creates a new bundle and enters interface configuration
mode for that bundle.
interface (bundle), on page 590
Enables use of Cisco-specific TLVs in addition to standard TLVs for
negotiating and exchanging LACP information on link bundles.
lacp cisco enable, on page 592
Displays information about configured bundles.show bundle, on page 619
Displays load balancing information, such as the ports, usage, weight,
and distribution of traffic on individual members of a link bundle
interface.
show bundle load-balancing, on page
638
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
575
Link Bundling Commands on the Cisco ASR 9000 Series Router
bundle load-balancing hash
To Next Page
Loading...
Need help?
General
