(Optional) Displays only the specified type of statistic. Valid values are:
• one-way-delay-ds—Displays only one-way (destination-to-source) delay.
• one-way-delay-sd—Displays only one-way (source-to-destination) delay.
• one-way-jitter-ds—Displays only one-way (destination-to-source) jitter.
• one-way-jitter-sd—Displays only one-way (source-to-destination) jitter.
• round-trip-delay—Displays only round-trip delay.
• round-trip-jitter—Displays only round-trip jitter.
• one-way-loss-ds—Displays only one-way (destination-to-source) loss.
• one-way-loss-sd—Displays only one-way (source-to-destination) loss.
statistic stat-type
Command Default
No default behavior or values
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 3.9.0
•
The one-way-delay-ds, one-way-delay-sd, one-way-jitter-ds, and
one-way-jitter-sd statistics type keywords were added.
•
The on-demand all and on-demand idkeyword options and arguments
were added.
• When the detail keyword is used, the “occurred at” field was added to the
display output to show when the last Min/Max statistic happened.
Release 4.0.0
The one-way-loss-ds, one-way-loss-sd statistic type keywords were added.Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
See the Usage Guidelines in the buckets size command for a description of buckets.
Task ID
OperationsTask ID
read, writeethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
386
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet sla statistics
To Next Page
Loading...
Need help?
General
