buckets archive
To configure the number of buckets to store in memory, use the buckets archive command in SLA profile
statistics configuration mode. To return to the default value, use the no form of this command.
buckets archive number
Syntax Description
Number of buckets to store. The range is 1 to 100.
number
Command Default
The default number of buckets stored in memory is 100.
Command Modes
SLA profile statistics configuration (config-sla-prof-stat-cfg)
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The results stored in the oldest bucket are discarded when the limit is reached, to make room for new results.
If the number of archived buckets for a given metric decreases, the oldest buckets are deleted and the remaining
buckets are untouched. If the number archived buckets for a given metric increases, the newest buckets are
filled when the data is collected. See the Usage Guidelines in the buckets size, on page 163 command for a
description of buckets.
Task ID
OperationsTask ID
read, writeethernet-services
Examples
The following example shows how to configure the number of buckets to store in memory:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet sla
RP/0/RSP0/CPU0:router(config-sla)# profile Prof1 type cfm-loopback
RP/0/RSP0/CPU0:router(config-sla-prof)# statistics measure round-trip-delay
RP/0/RSP0/CPU0:router(config-sla-prof-stat-cfg)# buckets archive 50
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
161
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
buckets archive
To Next Page
Loading...
Need help?
General
