show sonet-local trace frr
To display the alarms associated with Fast Re-Route (FRR) for all nodes or for a specific node, use the show
sonet-local trace frr command in EXEC mode.
show sonet-local trace frr location node-id
Syntax Description
Full path location of the node.
For more information about the syntax for the router, use the question mark
(?) online help function.
location node-id
Command Default
Displays the FRR alarms for all nodes on the router.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readcisco-support
Examples
The following example shows how to display the FRR alarms for a specific node:
RP/0/RSP0/CPU0:router# show sonet-local trace frr location 0/1/0/0
The following example shows how to display the FRR alarms for all nodes on the router:
RP/0/RSP0/CPU0:router# show sonet-local trace frr
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
914
SONET Controller Commands on the Cisco ASR 9000 Series Router
show sonet-local trace frr
To Next Page
Loading...
Need help?
General
