bc_owned_res: Yes
cc_owned_res: Yes
is_parent_up: Yes
Last Packet Tx: 00:00:01 ago
Round trip: 00:00.000 (0 secs 999997 nsecs)
Min Round trip: 00:00.000 (0 secs 999997 nsecs)
Max Round trip: 00:00.004 (0 secs 4999985 nsecs)
cfg_lid:
mfr_t_hello: 10
mfr_t_ack: 4
mfr_retry_max: 2
--------------- Member Link Statistics ---------------
Add Link Tx: 3 Add Link Rx: 2
Add Link Ack Tx: 2 Add Link Ack Rx: 1
Add Link Rej Tx: 0 Add Link Rej Rx: 0
Remove Link Tx: 0 Remove Link Rx: 0
Remove Link Ack Tx: 0 Remove Link Ack Rx: 0
Hello Tx: 6236 Hello Rx: 6235
Hello Ack Tx: 6235 Hello Ack Rx: 6236
Loopback Detected: 0 Invalid Pkts Rx: 0
Bundle Mismatch: 0 Expired Ack Rx: 0
Hello Timer expiry: 6237 Ack Timer expiry: 1
The following example shows how to display detailed multilink Frame Relay information for all interfaces,
including IDB information and FSM statistics, on a Cisco 2-Port Channelized OC-12c/DS0 SPA:
RP/0/RSP0/CPU0:router# show frame-relay multilink detail
Fri Mar 25 14:04:05.425 UTC
Bundle interface: Multilink0/2/1/0/1, ifhandle 0x04002840
Member Links: 2 active, 0 inactive
State = Up, BW Class = A
nodeid: 0x829
group: 1
my_bid: Multilink0/2/1/0/1
peer_bid: Multilink0/2/1/0/1
magic: 0x75b06726
flags: 0x0
im_state: 3 [Up]
fsm_req_state: 3 [Up]
is_owned_resource: Y
is_zombie: N
active_mbr_count: 2
cfg_bid:
bw_class: 1
bw_class_threshold: 0
=============== Member Links ===============
Serial0/2/1/0/1/2:0, HW state = Up, link state = Up
my_lid: Serial0/2/1/0/1/2:0
peer_lid: Serial0/2/1/0/1/2:0
flags: 0x0
fsm_state: 3 [Up]
im_state: 3 [Up]
fsm_req_state: 3 [Up]
cause: 0 [None]
retry_count: 0
in_loopback: No
bc_init_rcvd: Yes
bc_owned_res: Yes
cc_owned_res: Yes
is_parent_up: Yes
Last Packet Tx: 00:00:06 ago
Round trip: 00:00.000 (0 secs 999997 nsecs)
Min Round trip: 00:00.000 (0 secs 999997 nsecs)
Max Round trip: 00:00.002 (0 secs 2999991 nsecs)
cfg_lid:
mfr_t_hello: 10
mfr_t_ack: 4
mfr_retry_max: 2
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
474
Frame Relay Commands on the Cisco ASR 9000 Series Router
show frame-relay multilink
To Next Page
Loading...
Need help?
General
