Task ID
OperationsTask ID
Readbundle
Examples
These examples display MC-LAG counter information:
The GigabitEthernet 0/0/0/1 is configured to Bundle-Ether 1 which is within ICCP Group1. Hence, the
show mlacp counters bdl-info GigabitEthernet 0/0/0/1 command displays the counters of the bundle
that GigabitEthernet 0/0/0/1 is associated with (i.e. Bundle-Ether1). The show mlacp counters mbr-info
Bundle-Ether 1 displays the counters of the members that Bundle-Ether1 is associated with (locally:
GigabitEthernet 0/0/0/1, and on the foreign device: GigabitEthernet 0/1/0/3).
Note
RP/0/RSP0/CPU0:router# show mlacp counters bdl-info GigabitEthernet 0/0/0/1
ICCP Group 1
TLVs Sent TLVs Received
Bundle Config State Priority NAKs Priority
-------------------- -------------------------------- ---------------------
Local Device
Bundle-Ether1 ????????????3 4 0 0 0
mLACP Peer 5.4.3.1
Bundle-Ether1 ????????????3 4 0 0 0
Sync Requests
Bundle TLVs (config) (state) Last Cleared
-------------------- -------------------------------- ------------
Local Device
Bundle-Ether1 ???????????0 0 0 18m12s
mLACP Peer 5.4.3.1
Bundle-Ether1 ???????????0 0 0 17m57s
RP/0/0/CPU0:router#show mlacp counters mbr-info Bundle-Ether 1
Bundle-Ether1 (ICCP Group 1)
TLVs Sent TLVs Received
Port Config State Priority NAKs Priority
-------------------- -------------------------------- ---------------------
Local Device
Gi0/0/0/1 ????????????????7 0 0 0 0
mLACP Peer 5.4.3.1
Gi0/1/0/3 ????????????????7 5 3 0 0
Sync Requests
Port TLVs (config) (state) Last Cleared
-------------------- -------------------------------- ------------
Local Device
All ports ?????????????????0 0 0 19m3s
Gi0/0/0/1 ?????????????????0 0 0 19m3s
mLACP Peer 5.4.3.1
All ports ?????????????????1 1 1 18m49s
Gi0/1/0/3 ?????????????????0 0 0 18m49s
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
664
Link Bundling Commands on the Cisco ASR 9000 Series Router
show mlacp counters
To Next Page
Loading...
Need help?
General
