show frame-relay vcm-info interface
To display Virtual Circuit (VC) manager information for a given interface, use the show frame-relay vcm-info
interface command in EXEC mode.
show frame-relay vcm-info interface type interface-path-id [vc dlci]
Syntax Description
Interface type. For more information, use the question mark (?) online help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?) online
help function.
interface-path-id
(Optional) Specifies a VC on the interface.vc
(Optional) Data-link Connection Identifier number. Range is from 0 to 1023.
dlci
Command Default
No default behavior or values
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readfr
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
484
Frame Relay Commands on the Cisco ASR 9000 Series Router
show frame-relay vcm-info interface
To Next Page
Loading...
Need help?
General
