Cisco A9K-SIP-700 Command Reference Guide

Resulting System Actionspeed Commandduplex Command
Autonegotiates for duplex mode
and forces 100 Mbps.
speed 100no duplex
Autonegotiates for duplex mode
and forces 10 Mbps.
speed 10no duplex
Forces full duplex and
autonegotiates for speed.
no speedduplex full
Forces 1000 Mbps (1 Gbps) and
full duplex.
speed 1000duplex full
Forces 100 Mbps and full duplex.speed 100duplex full
Forces 10 Mbps and full duplex.speed 10duplex full
Forces half duplex and
autonegotiates for speed (10 or 100
Mbps.)
no speedduplex half
Forces 100 Mbps and half duplex.speed 100duplex half
Forces 10 Mbps and half duplex.speed 10duplex half
Task ID
OperationsTask ID
read, writeinterface
Examples
This example shows how to configure the Management Ethernet interface to transmit at one gigabit:
RP/0/RSP0/CPU0:router(config)# interface MgmtEth 0/RSP0/CPU0/0
RP/0/RSP0/CPU0:router(config-if)# speed 1000
Related Commands
DescriptionCommand
Enters interface configuration mode for the Management Ethernet
interface.
interface MgmtEth, on page 668
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
673
Management Ethernet Interface Commands on the Cisco ASR 9000 Series Router
speed (Management Ethernet)

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English