Cisco A9K-SIP-700 Command Reference Guide

show tech-support iphc
To collect and display IP header compression (IPHC) data for an interface, node, or rack, and store that data
in a file, use the show tech-support iphc command in EXEC mode.
show tech-support iphc [file| interface type interface-path-id [location node-id| rack rack_name]| location
node-id| rack rack_name] file location file_name [background] [compressed| uncompressed]
Syntax Description
(Optional) Specifies a file name and location for IPHC data to be saved to.file
(Optional) Collects IPHC data for the specified interface.interface
(Optional) Interface type. For more information, use the question mark (?) online
help function.
type
(Optional) Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?) online
help function.
interface-path-id
(Optional) Collects IPHC data for the specified card location (node-id).location node-id
(Optional) Collects IPHC data for the specified rack.
rack rack_name
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
823
Serial Interface Commands on the Cisco ASR 9000 Series Router
show tech-support iphc

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English