Related Commands
DescriptionCommand
Specifies or creates an Ethernet interface and enters interface
configuration mode.
interface (Ethernet), on page 85
Enables E-LMI operation on an interface and enters interface
Ethernet LMI configuration mode.
ethernet lmi, on page 211
Displays E-LMI information for an interface, including protocol
status and error and event statistics.
show ethernet lmi interfaces, on page
355
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
271
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
log disable
To Next Page
Loading...
Need help?
General
