Cisco A9K-SIP-700 Command Reference Guide

clear lacp counters
To clear Link Aggregation Control Protocol (LACP) counters for all members of all bundles, all members of
a specific bundle, or for a specific port, enter the clear lacp counters command in EXEC mode.
clear lacp counters [bundle Bundle-Ether bundle-id| port {GigabitEthernet interface-path-id| TenGigE
interface-path-id}]
Syntax Description
(Optional) Clears LACP counters for all members of a bundle.bundle
(Optional) Ethernet bundle. Use the node-id argument to specify the node ID
number of the LACP counters you want to clear. Range is 1 through 65535.
Bundle-Ether node-id
(Optional) Clears all LACP counters on the specified bundle or interface.port
(Optional) Gigabit Ethernet interface. Use the interface-path-id argument to
specify the Gigabit Ethernet interface whose LACP counters you want to clear.
GigabitEthernet
(Optional) Ten Gigabit Ethernet interface. Use the interface-path-id argument
to specify the Ten Gigabit Ethernet interface whose LACP counters you want to
clear.
TenGigE
Command Default
No default behavior or values
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
executebundle
read, writebasic-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
586
Link Bundling Commands on the Cisco ASR 9000 Series Router
clear lacp counters

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English