Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
When you clear a bucket for a currently running probe, the remaining statistics are still collected and stored
in that bucket.
See the Usage Guidelines in the buckets size, on page 163 command for a description of buckets.
Task ID
OperationsTask ID
executeethernet-services
Examples
The following example shows how to delete the contents of all buckets currently being filled for a specified
profile:
RP/0/RSP0/CPU0:router# clear ethernet sla statistics current profile P1
The following example shows how to delete the contents of all full buckets for a specified profile:
RP/0/RSP0/CPU0:router# clear ethernet sla statistics history profile P2
The following example shows how to delete the contents of all buckets for a specified profile:
RP/0/RSP0/CPU0:router# clear ethernet sla statistics profile P3
The following example shows how to delete the contents of all buckets for all profiles:
RP/0/RSP0/CPU0:router# clear ethernet sla statistics profile all
The following example shows how to delete the contents of all buckets for all profiles on a specified interface
and domain that is targeted to a specific MEP:
RP/0/RSP0/CPU0:router# clear ethernet sla statistics profile all interface TenGigE 0/6/1/0
domain D1 target mep-id 3
Related Commands
DescriptionCommand
Configures the size of the buckets in which statistics are collected.buckets size, on page 163
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
185
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
clear ethernet sla statistics profile
To Next Page
Loading...
Need help?
General
