Cisco A9K-SIP-700 Command Reference Guide

show bundle replication bundle-ether
To display the replication status of a link bundle interface, use the show bundle replication bundle-ether
command in EXEC mode.
show bundle replication bundle-ether bundle_id [all] [in-progress] [pending]
Syntax Description
Shows replication status for all nodes.all
Shows only nodes with replication in progress.in-progress
Shows only nodes pending replication.pending
Command Default
No default behavior or values
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readbundle
Examples
The following example shows how to
RP/0/RSP0/CPU0:router# show bundle replication bundle-ether 1 all
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
642
Link Bundling Commands on the Cisco ASR 9000 Series Router
show bundle replication bundle-ether

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English