Cisco A9K-SIP-700 Command Reference Guide

Task ID
OperationsTask ID
read, writeethernet-services
Examples
The following example shows how to configure AIS transmission on a CFM interface.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface gigabitethernet 0/1/0/2
RP/0/RSP0/CPU0:router(config-if)# ethernet cfm
RP/0/RSP0/CPU0:router(config-if-cfm)# ais transmission up interval 1m cos 7
Related Commands
DescriptionCommand
Configures AIS transmission for a CFM domain service.ais transmission, on page 157
Configures AIS logging for a CFM domain service to indicate
when AIS or LCK packets are received.
log ais, on page 263
Displays the information about interfaces that are currently
transmitting AIS.
show ethernet cfm interfaces ais, on page
324
Displays information about local MEPs.show ethernet cfm local meps, on page 333
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
160
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
ais transmission up

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English