Examples
The following example shows how to configure the window in which reverting from FEC-FRR may be
triggered:
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# controller dwdm 0/1/0/1
RP/0/RSP0/CPU0:router(config-dwdm)# proactive revert window 100000
Related Commands
DescriptionCommand
Displays optical parameters, G.709 alarms and counters, and register
and module information for a DWDM controller.
show controller dwdm, on page 56
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
51
Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router
proactive revert window
To Next Page
Loading...
Need help?
General
