DescriptionField
Total number of bytes, including data and MAC
encapsulation, in the error-free packets transmitted
by the system.
bytes
Total number of packets dropped from the output
queue because the queue was full.
total output drops
Indicates the total number of broadcast and multicast
packets transmitted by the interface.
Output
Displays the number of errors transmitted on the
interface. Output errors occur when outgoing cells
are dropped or corrupted. The possible types output
errors are as follows:
• underruns—Number of times that the far-end
transmitter has been running faster than the
near-end receiver can handle.
• aborts—Number of illegal sequences of one bits
on the interface.
• loss of carrier—Number of times the interface
was reset because the carrier detect line of that
interface was up, but the line protocol was
down.
Output errors
Related Commands
DescriptionCommand
display brief information about backplane Ethernet
interfaces in a particular location
show controllers backplane ethernet location brief,
on page 542
Displays information about client applications in a
particular location.
show controllers backplane ethernet location
clients, on page 545
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
549
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
show controllers backplane ethernet location detail
To Next Page
Loading...
Need help?
General
