Cisco A9K-SIP-700 Command Reference Guide

RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface TenGigE 6/0/0/0
RP/0/RSP0/CPU0:router(config-if)# mtu 1000
After the mtu command is used to decrease the MTU Layer 2 frame size for the POS interface on 6/0/0/0 to
1000 bytes, the show interfaces all brief command is used again to verify that the MTU Layer 2 frame size
has been changed:
RP/0/RSP0/CPU0:router# show interfaces all brief
Intf Intf LineP Encap MTU BW
Name State State Type (byte) (Kbps)
--------------------------------------------------------------------------------
Nu0 up up Null 1500 Unknown
PO6/0/0/0 up up HDLC 1000 2488320
PO6/0/0/1 up up HDLC 4474 2488320
PO6/0/0/2 admin-down admin-down HDLC 4474 2488320
PO6/0/0/3 admin-down admin-down HDLC 4474 2488320
Mg0/RSP0/CPU0/0 up up ARPA 1514 100000
Related Commands
DescriptionCommand
Disables an interface (forces an interface to be administratively
down).
shutdown (global), on page 531
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
511
Global Interface Commandsonthe Cisco ASR 9000 Series Router
mtu

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English