• esr-pm-fe—Far-end path monitoring errored seconds ratio (ESR-PM). Indicates the
errored seconds ratio recorded in the OTN path during the performance monitoring time
interval.
• esr-pm-ne—Near-end path monitoring errored seconds ratio (ESR-PM).
• esr-sm-fe—Far-end section monitoring errored seconds ratio (ESR-SM). Indicates the
errored seconds ratio recorded in the OTN section during the performance monitoring
time interval.
• esr-sm-ne—Near-end section monitoring errored seconds ratio (ESR-SM).
• fc-pm-fe—Far-end path monitoring failure counts (FC-PM). Indicates the failure counts
recorded in the OTN path during the performance monitoring time interval.
• fc-pm-ne—Near-end path monitoring failure counts (FC-PM).
• fc-sm-fe—Far-end section monitoring failure counts (FC-SM). Indicates the failure
counts recorded in the OTN section during the performance monitoring time interval.
• fc-sm-ne—Near-end section monitoring failure counts (FC-SM).
• ses-pm-fe—Far-end path monitoring severely errored seconds (SES-PM). Indicates the
severely errored seconds recorded in the OTN path during the performance monitoring
time interval.
• ses-pm-ne—Far-end path monitoring severely errored seconds (SES-PM).
• ses-sm-fe—Far-end section monitoring severely errored seconds (SES-SM). Indicates
the severely errored seconds recorded in the OTN section during the performance
monitoring time interval.
• ses-sm-ne—Near-end section monitoring severely errored seconds (SES-SM).
• sesr-pm-fe—Far-end path monitoring severely errored seconds ratio (SESR-PM).
Indicates the severely errored seconds ratio recorded in the OTN path during the
performance monitoring time interval.
• sesr-pm-ne—Near-end path monitoring severely errored seconds ratio (SESR-PM).
• sesr-sm-fe—Far-end section monitoring severely errored seconds ratio (SESR-SM).
Indicates the severely errored seconds ratio recorded in the OTN section during the
performance monitoring time interval.
• sesr-sm-ne—Near-end section monitoring severely errored seconds ratio (SESR-SM).
• uas-pm-fe—Far-end path monitoring unavailable seconds (UAS-PM). Indicates the
unavailable seconds recorded in the OTN path during the performance monitoring time
interval.
• uas-pm-ne—Near-end path monitoring unavailable seconds (UAS-PM).
• uas-sm-fe—Far-end section monitoring unavailable seconds (UAS-SM). Indicates the
unavailable seconds recorded in the OTN section during the performance monitoring
time interval.
• uas-sm-ne—Near-end section monitoring unavailable seconds (UAS-SM).
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
44
Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router
pm otn threshold
To Next Page
Loading...
Need help?
General
