show ethernet cfm local maintenance-points
To display a list of local maintenance points, use the show ethernet cfm local maintenance-points command
in EXEC mode.
show ethernet cfm local maintenance-points [domain domain-name [service service-name]| interface type
interface-path-id] [mep| mip]
Syntax Description
(Optional) Displays information about the specified domain, where domain-name
is a string of a maximum of 80 characters that identifies the domain in which the
maintenance points reside.
domain domain-name
(Optional) Displays information about the specified service, where service-name
is a string of a maximum of 80 characters that identifies the maintenance association
to which the maintenance points belong.
service service-name
(Optional) Displays information about the specified interface type. For more
information, use the question mark (?) online help function.
interface type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
(Optional) Displays information about maintenance end points (MEPs).mep
(Optional) Displays information about maintenance intermediate points (MIPs).mip
Command Default
All maintenance points from all interfaces are displayed.
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
330
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet cfm local maintenance-points
To Next Page
Loading...
Need help?
General
