show lldp neighbors
To display information about Link Layer Discovery Protocol (LLDP) neighbors, use the show lldp neighbors
command in EXEC configuration mode.
show lldp neighbors [type interface-path-id | location location] [detail]
Syntax Description
(Optional) Interface type. For more information, use the question mark (?) online
help function.
type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router. For more information about the syntax for the
router, use the question mark (?) online help function.
Note
interface-path-id
(Optional) Displays information about LLDP neighbors for the specified location.
The location argument is entered in the rack/slot/module notation.
location location
(Optional) Displays all available information about LLDP neighbors.detail
Command Default
Basic device information for LLDP neighbors is displayed.
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
To clear the neighbor information displayed by the show lldp neighbors command, use the clear lldp table
command.
Task ID
OperationTask ID
readethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
118
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
show lldp neighbors