show ethernet sla configuration-errors
To display information about errors that are preventing configured Ethernet Service Level Agreement (SLA)
operations from becoming active, as well as any warnings that have occurred, use the show ethernet sla
configuration-errors command in EXEC mode.
show ethernet sla configuration-errors [domain domain-name] [interface type interface-path-id] [profile
profile-name]
Syntax Description
Displays information for the specified domain, where domain-name is a string
of a maximum of 80 characters that identifies the domain where the SLA
operation is configured.
domain domain-name
(Optional) Displays information for the specified interface type. For more
information, use the question mark (?) online help function.
interface type
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
(Optional) Displays information for the specified profile name.
profile profile-name
Command Default
No default behavior or values
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
379
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet sla configuration-errors
To Next Page
Loading...
Need help?
General
