Cisco A9K-SIP-700 Command Reference Guide

domain
To create and name a container for all domain configurations and enter the CFM domain configuration mode,
use the domain command in CFM configuration mode. To remove the domain, use the no form of this
command.
domain domain-name level level-value [id null [dns dns-name][mac H.H.H][string string]]
no domain domain-name level level-value [id null [dns dns-name][mac H.H.H][string string]]
Syntax Description
Administrative name unique to this container, case sensitive ASCII string, up to
80 characters.
domain-name
The CFM protocol level of this domain. Range is 0 to 7.
level level-value
(Optional) Maintenance domain identifier (MDID) used in conjunction with one
of the following keywords to specify the MDID type and value:
•
null
•
dns DNS-name
•
mac H.H.H
•
string string
id
(Optional) Null value ID, used with the id keyword.null
(Optional) DNS name, up to 43 characters in length, used with the id keyword.
dns DNS-name
(Optional) Hexadecimal MAC address, used with the id keyword.
mac H.H.H
(Optional) Maintenance domain identifier (MDID) value, up to 43 characters in
length, used with the id keyword.
The domain name may be the used here as the maintenance domain
identifier (MDID) if desired.
Note
string string
Command Default
If id is not specified, the domain name is used as the MDID.
Command Modes
CFM configuration (config-cfm)
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
201
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
domain

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English