Cisco A9K-SIP-700 Command Reference Guide

(Optional) Number in the range 1
to 31 of the day of the month on
which to start the probe.
day
(Optional) Name of the month (full
word in English) in which to start
the probe.
month
(Optional) Year (fully specified as
4 digits) in which to start the probe.
year
(Optional) Specifies a relative time,
as a number of seconds, minutes or
hours from the current time, at
which to start the probe, where
number is in the following ranges:
•
1 to 3600 seconds
•
1 to 1440 minutes
•
1 to 24 hours
schedule in number {seconds | minutes | hours}
(Optional) Specifies the length of
the probe as a number of seconds,
minutes, or hours, where number
is in the following ranges:
•
1 to 3600 seconds
•
1 to 1440 minutes
•
1 to 24 hours
The duration should not
exceed the interval
specified by the repeat
every option.
Note
for duration {seconds | minutes | hours}
(Optional) Specifies the interval at
which to restart the probe as a
number of seconds, minutes, or
hours, where number is in the
following ranges:
•
1 to 90 seconds
•
1 to 90 minutes
•
1 to 24 hours
The default is that probes are not
repeated, and there is no default
interval.
repeat every number {seconds | minutes | hours}
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
229
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
ethernet sla on-demand operation type cfm-delay-measurement probe

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English