show ethernet loopback active
To display the loopback sessions that are currently active, use the show ethernet loopback active command
in the EXEC mode.
show ethernet loopback active {interfaceinterface name| brief}
Syntax Description
Displays the active loopback sessions for this specified interface.
interface interface name
Displays a brief information of the active loopback sessions on all
interfaces.
brief
Command Default
Displays the information of active loopback sessions on all interfaces.
Command Modes
EXEC(#)
Command History
ModificationRelease
This command was introduced.Release 5.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
executeethernet-services
Examples
This example shows a sample output of the show ethernet loopback active brief command:
RP/0/RSP0/CPU0:routershow ethernet loopback active brief
Interface ID Direction Time left Status
----------------------------------------------------------------
GigabitEthernet0/0/0/0 1 External 01:23:45 Starting
TenGigE0/1/0/0.200 1 Internal 00:01:17 Active
TenGigE0/1/0/0.200 2 External 00:00:00 Stopping
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
363
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet loopback active
To Next Page
Loading...
Need help?
General
