Cisco A9K-SIP-700 Command Reference Guide

Changing the size of the buckets for a given metric clears all stored data for that metric. All existing
buckets are deleted and new buckets are created.
Note
Task ID
OperationsTask ID
read, writeethernet-services
Examples
This example shows how to configure the size of the buckets in which statistics are collected.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet sla
RP/0/RSP0/CPU0:router(config-sla)# profile Prof1 type cfm-loopback
RP/0/RSP0/CPU0:router(config-sla-prof)# statistics measure round-trip-delay
RP/0/RSP0/CPU0:router(config-sla-prof-stat-cfg)# buckets size 100 per-probe
Related Commands
DescriptionCommand
Configures the number of buckets to store in memory.buckets archive, on page 161
Enters SLA profile probe configuration mode.probe, on page 298
schedule (SLA), on page 307
Configures the number and timing of packets sent by a probe
in an operations profile.
send (SLA), on page 311
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
164
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
buckets size

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English