continuity-check archive hold-time
To configure the time limit for how long peer maintenance-end-points (MEPs) are held in the continuity-check
database after they have timed out (no more CCMs are received), use the continuity-check archive hold-time
command in CFM domain service configuration mode. To return to the default value, use the no form of this
command.
continuity-check archive hold-time minutes
no continuity-check archive hold-time minutes
Syntax Description
Time limit (in minutes) that peer MEPs are held in the continuity-check database
before they are cleared. Range is 1 to 65535.
minutes
Command Default
The default is 100.
Command Modes
CFM domain service configuration (config-cfm-dmn-svc)
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Peer MEPs appear in show ethernet cfm peer meps command display output after they timeout (no more
continuity check messages (CCMs) are received).
Task ID
OperationsTask ID
read, writeethernet-services
Related Commands
DescriptionCommand
Displays information about maintenance end points (MEPs)
for peer MEPs.
show ethernet cfm peer meps, on page 339
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
190
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
continuity-check archive hold-time
To Next Page
Loading...
Need help?
General
