show frame-relay pvc
To display statistics about Frame Relay permanent virtual circuits (PVCs), use the show frame-relay pvc
command in EXEC mode.
show frame-relay pvc [interface type interface-path-id| location node-id] [dlci-number]
Syntax Description
(Optional) Interface for which information is to be displayed. Use the type and
interface-path-id arguments to specify the interface.
interface
(Optional) Interface type. For more information, use the question mark (?) online
help function.
type
(Optional) Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
(Optional) Displays information about all interfaces on the specified node. The
node-id argument is entered in the rack/slot/module notation.
location node-id
(Optional) DLCI number used to identify the PVC. The range is from 16 to 1007.
dlci-number
Command Default
Information for all Frame Relay interfaces and PVCs is displayed.
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The show frame-relay pvc command is available on Packet-over-SONET/SDH (POS), serial, and multilink
interfaces.
This command is used to check the status of PVCs on interfaces.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
480
Frame Relay Commands on the Cisco ASR 9000 Series Router
show frame-relay pvc
To Next Page
Loading...
Need help?
General
