Examples
The following example shows how to configure the symbol-period low and high thresholds that trigger a
symbol-period error event:
RP/0/RSP0/CPU0:router(config)# ethernet oam profile Profile_1
RP/0/RSP0/CPU0:router(config-eoam)# link-monitor
RP/0/RSP0/CPU0:router(config-eoam-lm)# symbol-period threshold low 100 high 6000
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
407
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
symbol-period threshold
To Next Page
Loading...
Need help?
General
