The encapsulation frame-relay command is available on Packet-over-SONET/SDH (POS), serial, and
multilink interfaces.
Task ID
OperationsTask ID
read, writeinterface
read, writefr
Examples
The following example shows Frame Relay encapsulation configured on Packet-over-SONET/SDH (POS)
0/3/0/1:
RP/0/RSP0/CPU0:router(config)# interface POS 0/3/0/1
RP/0/RSP0/CPU0:router(config-if)# encapsulation frame-relay ietf
Related Commands
DescriptionCommand
Changes the encapsulation for a Frame Relay PVC.encap (PVC), on page 427
Disables the Frame Relay LMI.frame-relay lmi disable, on page 433
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
430
Frame Relay Commands on the Cisco ASR 9000 Series Router
encapsulation frame-relay
To Next Page
Loading...
Need help?
General
