Cisco A9K-SIP-700 Command Reference Guide

Examples
The following example shows how to set the MEF Polling Verification Timer for E-LMI to 30 seconds:
RP/0/RSP0/CPU0:router# interface gigabitethernet 0/1/0/0
RP/0/RSP0/CPU0:router(config-if)# ethernet lmi
RP/0/RSP0/CPU0:router(config-if-elmi)# polling-verification-timer 30
Related Commands
DescriptionCommand
Specifies or creates an Ethernet interface and enters interface
configuration mode.
interface (Ethernet), on page 85
Enables E-LMI operation on an interface and enters interface
Ethernet LMI configuration mode.
ethernet lmi, on page 211
Displays E-LMI information for an interface, including protocol
status and error and event statistics.
show ethernet lmi interfaces, on page
355
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
295
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
polling-verification-timer

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English