interface MgmtEth
To enter interface configuration mode for the Management Ethernet interface, use the interface MgmtEth
command in global configuration mode. To delete a Management Ethernet interface configuration, use the
no form of this command.
interface MgmtEth interface-path-id
no interface MgmtEth interface-path-id
Syntax Description
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
Command Default
No default behavior or values
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeinterface
Examples
This example shows how to enter interface configuration mode for a Management Ethernet interface:
RP/0/RSP0/CPU0:router(config)# interface MgmtEth 0/RSP0/CPU0/0
RP/0/RSP0/CPU0:router(config-if)#
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
668
Management Ethernet Interface Commands on the Cisco ASR 9000 Series Router
interface MgmtEth
To Next Page
Loading...
Need help?
General
