Cisco A9K-SIP-700 Command Reference Guide

mlacp reset priority
To reset operational priorities of mlacp members to their configured mLACP prorities, use the mlacp reset
priority command in EXEC mode.
mlacp reset priority bundle-ether interface-path-id
Syntax Description
Specifies a physical interface instance or a virtual interface
instance.
bundle-ether interface-path-id
Command Default
No default behavior or values.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 4.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator.
This command is for aggregated ethernet interfaces only. The command cannot be used if brute-force switchover
is employed.
Task ID
OperationTask ID
executebundle
Examples
The following example shows how to use the mlacp reset priority command:
RP/0/RSP0/CPU0:router #mlacp reset priority bundle-ether 10
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
504
Global Interface Commandsonthe Cisco ASR 9000 Series Router
mlacp reset priority

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English