show ethernet oam configuration
To display the current active Ethernet OAM configuration on an interface, use the show ethernet oam
configuration command in EXEC mode.
show ethernet oam configuration [interface type interface-path-id]
Syntax Description
(Optional) Displays information about the specified interface type. For more
information, use the question mark (?) online help function.
interface type
(Optional) Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
interface-path-id
Command Default
If no parameters are specified, the configurations for all Ethernet OAM interfaces is displayed.
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command displays the Ethernet OAM configuration information for all interfaces, or a specified interface.
Task ID
OperationsTask ID
readethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
366
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet oam configuration
To Next Page
Loading...
Need help?
General
