Cisco A9K-SIP-700 Command Reference Guide

ethernet sla
To enter the Ethernet Service Level Agreement (SLA) configuration mode, use the ethernet sla command in
global configuration mode.
ethernet sla
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
Global configuration (config)
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeethernet-services
Examples
The following example shows how to enter the Ethernet SLA configuration mode.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet sla
RP/0/RSP0/CPU0:router(config-sla)#
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
216
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
ethernet sla

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English