Task ID
OperationsTask ID
read, writedwdm
Examples
The following example shows how to enable TCA reporting on the optics layer reporting for the maximum
OPT:
RP/0/RSP0/CPU0:router(config)# controller dwdm 0/0/0/0
RP/0/RSP0/CPU0:router(config-dwdm)# pm 15-min optics report opt max-tca enable
Related Commands
DescriptionCommand
Displays performance monitoring information for a DWDM
controller.
show controller dwdm pm, on page 63
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
37
Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router
pm optics report enable
To Next Page
Loading...
Need help?
General
