Cisco A9K-SIP-700 Command Reference Guide

redundancy one-way
To enforce one-way pseudowire redundancy behavior when the redundancy group is configured, use the
redundancy one-way command in the L2VPN pseudowire class configuration mode. To return to the default,
use the no form of this command.
redundancy one-way
no redundancy one-way
This command has no keywords or arguments.
Command Default
One-way redundancy is disabled.
Command Modes
L2VPN pseudowire class configuration
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writel2vpn
Examples
The following example shows how to :
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class class_mpls
RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# encapsulation mpls
RP/0/RSP0/CPU0:router(config-l2vpn-pwc-mpls)# redundancy one-way
RP/0/RSP0/CPU0:router(config-l2vpn-pwc-mpls)#
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
618
Link Bundling Commands on the Cisco ASR 9000 Series Router
redundancy one-way

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English