in addition to the low threshold actions. The high threshold is optional and is configurable only in conjunction
with the low threshold.
Task ID
OperationsTask ID
read, writeethernet-services
Examples
The following example shows how to configure the low and high thresholds that trigger a frame-period error
event.
RP/0/RSP0/CPU0:router(config)# ethernet oam profile Profile_1
RP/0/RSP0/CPU0:router(config-eoam)# link-monitor
RP/0/RSP0/CPU0:router(config-eoam-lm)# frame-period threshold low 100 high 600000
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
250
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
frame-period threshold
To Next Page
Loading...
Need help?
General
