DescriptionField
Indicates if an Ethernet Fault Detection (EFD) event
has occurred on the interface and the type of fault that
triggered the interface to be moved to the down state
for the line protocol. The possible EFD trigger events
are:
•
capabilities-conflict
•
discovery-timeout
•
link-fault
•
session-down
•
wiring-conflict
EFD triggered
Related Commands
DescriptionCommand
Displays the current active Ethernet OAM configuration on
an interface.
show ethernet oam configuration, on page 366
Displays the current status of Ethernet OAM sessions.show ethernet oam discovery, on page 369
Displays the local and remote Ethernet OAM statistics for
interfaces.
show ethernet oam statistics, on page 377
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
376
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet oam interfaces
To Next Page
Loading...
Need help?
General
