Cisco A9K-SIP-700 Command Reference Guide

snmp-server traps ethernet oam events
To enable SNMP traps for Ethernet OAM events, use the snmp-server traps ethernet oam events command
in global configuration mode.
snmp-server traps ethernet oam events
Syntax Description
This command has no keywords or arguments.
Command Default
Ethernet OAM event traps are not enabled.
Command Modes
Global configuration (config)
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writesnmp
Examples
The following example shows how to enable SNMP server traps on an Ethernet OAM interface.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# snmp-server traps ethernet oam events
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
401
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
snmp-server traps ethernet oam events

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English