action uni-directional link-fault
To configure what action is taken on an interface when a link-fault notification is received from the remote
Ethernet OAM peer, use the action uni-directional link-fault command in Ethernet OAM configuration
mode or interface Ethernet OAM configuration mode. To return to the default, use the no form of this command.
action uni-directional link-fault {disable| efd | error-disable-interface| log}
no action uni-directional link-fault {disable| efd | error-disable-interface| log}
Syntax Description
Performs no action on the interface when a capabilities-conflict event occurs.disable
Puts the line protocol into the down state for an interface when a capabilities-conflict
event occurs. The state is removed when the first packet is received without a
conflict.
efd
Puts the interface into the error-disable state when a capabilities-conflict event
occurs.
error-disable-interface
(Interface Ethernet OAM configuration only) Creates a syslog entry when a
capabilities-conflict event occurs. This action is available only in interface Ethernet
OAM configuration mode to override the OAM profile on a specific interface.
log
Command Default
The default action is to create a syslog entry.
Command Modes
Ethernet OAM configuration (config-eoam)
Interface Ethernet OAM configuration (config-if-eoam)
Command History
ModificationRelease
This command was introduced.
This command replaces the action link-fault command.
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command only determines the action taken when a uni-directional link fault notification is received from
the peer; it does not affect the action taken when a fault is detected locally.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
151
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
action uni-directional link-fault
To Next Page
Loading...
Need help?
General
