Examples
The following example shows how to set the hold-time and the size of a traceroute cache.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet cfm
RP/0/RSP0/CPU0:router(config-cfm)# traceroute cache hold-time 1 size 3000
Related Commands
DescriptionCommand
Enters CFM configuration mode.ethernet cfm (global), on page 207
Sends Ethernet CFM traceroute messages to generate a
basic.
traceroute ethernet cfm, on page 415
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
414
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
traceroute cache
To Next Page
Loading...
Need help?
General
