Cisco A9K-SIP-700 Command Reference Guide

redundancy
To enter the redundancy configuration mode to configure Multi-Router Automatic Protection Switching
(MR-APS), use the redundancy command in global configuration mode.
redundancy
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readppp
Examples
The following example shows how to enter the redundancy configuration mode:
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# redundancy
RP/0/RSP0/CPU0:router(config-redundancy)#
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
755
PPP Commands onthe Cisco ASR 9000 Series Router
redundancy

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English